<!-- *********************************************************************************************** Microsoft.Common.targets WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have created a backup copy. Incorrect changes to this file will make it impossible to load or build your projects from the command-line or the IDE. This file defines the steps in the standard build process for .NET projects. It contains all the steps that are common among the different .NET languages, such as Visual Basic, and Visual C#. Copyright (C) Microsoft Corporation. All rights reserved. *********************************************************************************************** --> <Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <!-- In VS 2010 SP1 and VS 2012, both supported for asset compatibility, the MSBuild installed as part of them did not enforce using the local ToolsVersion (4.0) in all cases, but instead just used whatever ToolsVersion was in the project file if it existed on the machine, and only forced 4.0 if that ToolsVersion did not exist. Moving forward, we do want to enforce a single acting ToolsVersion per version of Visual Studio, but in order to approximate this behavior on VS 2010 SP1 and VS 2012 as well, we've redirected the targets: If we're building using 4.X MSBuild (which doesn't define the new reserved property, MSBuildAssemblyVersion), we'll point right back at the 4.0 targets, which still exist as part of the .NET Framework. Only if we're using the new MSBuild will we point to the current targets. --> <Choose> <When Condition="'$(MSBuildAssemblyVersion)' == ''"> <PropertyGroup> <CommonTargetsPath>$(MSBuildFrameworkToolsPath)\Microsoft.Common.targets</CommonTargetsPath> </PropertyGroup> </When> <Otherwise> <PropertyGroup> <CommonTargetsPath>$(MSBuildToolsPath)\Microsoft.Common.CurrentVersion.targets</CommonTargetsPath> </PropertyGroup> </Otherwise> </Choose> <PropertyGroup Condition="'$(MSBuildAssemblyVersion)' == ''"> <!-- Overrides for the Microsoft.Common.targets extension targets. Used to make sure that only the imports we specify (hard-coded to 4.0 locations) are used, not the 12.0 locations that would be used by default. NOTE: This logic is duplicated in Microsoft.VisualBasic.targets and in Microsoft.CSharp.targets because those two files import Microsoft.Common.targets from the current directory and thus don't get the benefit of the redirections, so for any changes to this logic in this file, please also edit the other two. --> <ImportByWildcardBefore40MicrosoftCommonTargets Condition="'$(ImportByWildcardBefore40MicrosoftCommonTargets)' == ''">$(ImportByWildcardBeforeMicrosoftCommonTargets)</ImportByWildcardBefore40MicrosoftCommonTargets> <ImportByWildcardBefore40MicrosoftCommonTargets Condition="'$(ImportByWildcardBefore40MicrosoftCommonTargets)' == ''">true</ImportByWildcardBefore40MicrosoftCommonTargets> <ImportByWildcardAfter40MicrosoftCommonTargets Condition="'$(ImportByWildcardAfter40MicrosoftCommonTargets)' == ''">$(ImportByWildcardAfterMicrosoftCommonTargets)</ImportByWildcardAfter40MicrosoftCommonTargets> <ImportByWildcardAfter40MicrosoftCommonTargets Condition="'$(ImportByWildcardAfter40MicrosoftCommonTargets)' == ''">true</ImportByWildcardAfter40MicrosoftCommonTargets> <ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets)' == ''">$(ImportUserLocationsByWildcardBeforeMicrosoftCommonTargets)</ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets> <ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets)' == ''">true</ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets> <ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets)' == ''">$(ImportUserLocationsByWildcardAfterMicrosoftCommonTargets)</ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets> <ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets)' == ''">true</ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets> <ImportByWildcardBeforeMicrosoftCommonTargets>false</ImportByWildcardBeforeMicrosoftCommonTargets> <ImportByWildcardAfterMicrosoftCommonTargets>false</ImportByWildcardAfterMicrosoftCommonTargets> <ImportUserLocationsByWildcardBeforeMicrosoftCommonTargets>false</ImportUserLocationsByWildcardBeforeMicrosoftCommonTargets> <ImportUserLocationsByWildcardAfterMicrosoftCommonTargets>false</ImportUserLocationsByWildcardAfterMicrosoftCommonTargets> <CustomBeforeMicrosoftCommonTargets Condition="'$(CustomBeforeMicrosoftCommonTargets)' == ''">$(MSBuildExtensionsPath)\v4.0\Custom.Before.Microsoft.Common.targets</CustomBeforeMicrosoftCommonTargets> <CustomAfterMicrosoftCommonTargets Condition="'$(CustomAfterMicrosoftCommonTargets)' == ''">$(MSBuildExtensionsPath)\v4.0\Custom.After.Microsoft.Common.targets</CustomAfterMicrosoftCommonTargets> </PropertyGroup> <PropertyGroup Condition="'$(MSBuildAssemblyVersion)' == '' and ('$(TargetFrameworkIdentifier)' == '.NETFramework' or '$(TargetFrameworkIdentifier)' == 'Silverlight' or ('$(TargetFrameworkIdentifier)' == '' and ('$(TargetRuntime)' == 'Managed' or '$(TargetRuntime)' == '')))"> <!-- Overrides for the Microsoft.NETFramework.props extension targets. Used to make sure that only the imports we specify (hard-coded to 4.0 locations) are used, not the 12.0 locations that would be used by default. Required because Microsoft.Common.targets imports it from the current directory, so we don't get a chance to redirect these in its own redirection targets. NOTE: This logic is duplicated in Microsoft.VisualBasic.targets and in Microsoft.CSharp.targets because those two files import Microsoft.Common.targets from the current directory and thus don't get the benefit of these redirections either, so for any changes to this logic in this file, please also edit the other two. --> <ImportByWildcardBefore40MicrosoftNetFrameworkProps Condition="'$(ImportByWildcardBefore40MicrosoftNetFrameworkProps)' == ''">$(ImportByWildcardBeforeMicrosoftNetFrameworkProps)</ImportByWildcardBefore40MicrosoftNetFrameworkProps> <ImportByWildcardBefore40MicrosoftNetFrameworkProps Condition="'$(ImportByWildcardBefore40MicrosoftNetFrameworkProps)' == ''">true</ImportByWildcardBefore40MicrosoftNetFrameworkProps> <ImportByWildcardAfter40MicrosoftNetFrameworkProps Condition="'$(ImportByWildcardAfter40MicrosoftNetFrameworkProps)' == ''">$(ImportByWildcardAfterMicrosoftNetFrameworkProps)</ImportByWildcardAfter40MicrosoftNetFrameworkProps> <ImportByWildcardAfter40MicrosoftNetFrameworkProps Condition="'$(ImportByWildcardAfter40MicrosoftNetFrameworkProps)' == ''">true</ImportByWildcardAfter40MicrosoftNetFrameworkProps> <ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps)' == ''">$(ImportUserLocationsByWildcardBeforeMicrosoftNetFrameworkProps)</ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps> <ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps)' == ''">true</ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps> <ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps)' == ''">$(ImportUserLocationsByWildcardAfterMicrosoftNetFrameworkProps)</ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps> <ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps)' == ''">true</ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps> <ImportByWildcardBeforeMicrosoftNetFrameworkProps>false</ImportByWildcardBeforeMicrosoftNetFrameworkProps> <ImportByWildcardAfterMicrosoftNetFrameworkProps>false</ImportByWildcardAfterMicrosoftNetFrameworkProps> <ImportUserLocationsByWildcardBeforeMicrosoftNetFrameworkProps>false</ImportUserLocationsByWildcardBeforeMicrosoftNetFrameworkProps> <ImportUserLocationsByWildcardAfterMicrosoftNetFrameworkProps>false</ImportUserLocationsByWildcardAfterMicrosoftNetFrameworkProps> </PropertyGroup> <ImportGroup Condition="'$(MSBuildAssemblyVersion)' == ''"> <Import Project="$(MSBuildUserExtensionsPath)\4.0\Microsoft.Common.targets\ImportBefore\*" Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\4.0\Microsoft.Common.targets\ImportBefore')"/> <Import Project="$(MSBuildExtensionsPath)\4.0\Microsoft.Common.targets\ImportBefore\*" Condition="'$(ImportByWildcardBefore40MicrosoftCommonTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\4.0\Microsoft.Common.targets\ImportBefore')"/> </ImportGroup> <ImportGroup Condition="'$(MSBuildAssemblyVersion)' == ''"> <Import Project="$(MSBuildUserExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportBefore\*" Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps)' == 'true' and exists('$(MSBuildUserExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportBefore')"/> <Import Project="$(MSBuildExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportBefore\*" Condition="'$(ImportByWildcardBefore40MicrosoftNetFrameworkProps)' == 'true' and exists('$(MSBuildExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportBefore')"/> </ImportGroup> <Import Project="$(CommonTargetsPath)" /> <ImportGroup Condition="'$(MSBuildAssemblyVersion)' == ''"> <Import Project="$(MSBuildExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportAfter\*" Condition="'$(ImportByWildcardAfter40MicrosoftNetFrameworkProps)' == 'true' and exists('$(MSBuildExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportAfter')"/> <Import Project="$(MSBuildUserExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportAfter\*" Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps)' == 'true' and exists('$(MSBuildUserExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportAfter')"/> </ImportGroup> <ImportGroup Condition="'$(MSBuildAssemblyVersion)' == ''"> <Import Project="$(MSBuildExtensionsPath)\4.0\Microsoft.Common.targets\ImportAfter\*" Condition="'$(ImportByWildcardAfter40MicrosoftCommonTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\4.0\Microsoft.Common.targets\ImportAfter')"/> <Import Project="$(MSBuildUserExtensionsPath)\4.0\Microsoft.Common.targets\ImportAfter\*" Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\4.0\Microsoft.Common.targets\ImportAfter')"/> </ImportGroup> <!-- Fix up FrameworkPathOverride, which is primarily used to determine the location of mscorlib.dll in the (relatively uncommon) situation where the reference assemblies, in which it's usually found, are not installed. --> <PropertyGroup Condition="'$(MSBuildAssemblyVersion)' == ''"> <FrameworkPathOverride Condition="!Exists('$(FrameworkPathOverride)\mscorlib.dll')">$(MSBuildFrameworkToolsPath)</FrameworkPathOverride> </PropertyGroup> </Project> |